Oak Cheshire Pattern Handrail, available with either:
- 41mm groove for 41mm spindles
- 32mm groove for 32mm spindles
Available in the following lengths:
All of our handrails come wrapped along with the appropriate size infill (32mm or 41mm wide depending on your spindle / groove size). Infill is supplied in lengths of approximately 1m, these can be cut to suit your spindle spacing on site.
Our handrail can be used either on the rake of your stairs or for landing areas.
Handrails can be fitted to your newel posts with easy to use handrail to newel fixing kits available on our fixings page. Alternatively, you could use a traditional mortise and tenon technique.
Handrails can be used between 2 newel posts, or they can be cut at 45 degrees to form a 90-degree mitre for example to return a landing balustrade.
Our oak stair parts come pre-sanded, unfinished. They can be finished by painting, waxing or varnishing.